Supermicro X9SCL Motherboard Rev1.1 Compatible with Intel Xeon E3-1200 & v2 Series up to 32 GB DDR3 RAM

Supermicro X9SCL Rev1.1 Motherboard Micro ATX LGA 1155 IPMI 2.0 6x SATA PORTS

Form Factor: uATX

Dimensions: 9.6" x 9.6", (24.4cm x 24.4 cm)

Processor/Cache

CPU:

Compatible with Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium® and Celeron processors *** *

Socket H2 (LGA 1155)

System Memory

Memory Capacity:

4x 240-pin DDR3 DIMM sockets

Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)

Memory Type: 1333/1600MHz*** ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes: 8GB, 4GB, 2GB, 1GB

Memory Voltage: 1.5 V, 1.35V

Error Detection: Corrects single-bit errors, Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset: Intel® C202 PCH chipset

SATA: 6x SATA2 (3Gb/s) w/ RAID 0, 1, 5, 10

VGA: BMC integrated Matrox G200

Super I/O: Nuvoton NCT6776F

Network Controllers:

Intel® 82579LM and 82574L, 2x Gigabit LAN ports

Virtual Machine Device Queues High efficient I/O overhead

Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

Input / Output

Serial ATA:

6 SATA 2.0 ports

6 SATA hard drives supported

LAN:

2x Gigabit Ethernet LAN ports:

Intel® 82579LM and Intel® 82574L

USB:

9x USB 2.0 ports total

(2x rear + 6x via header + 1x type A)

VGA: 1x VGA port

Serial Port / Header: 2x Fast UART 16550 serial port (one header and one rear port)

DOM: 1x DOM (Disk on Module) power connector

TPM: 1x TPM Header

Chassis ( Optimized for X9SCL ): 1U Chassis

CSE-113MTQ-330CB

CSE-113MTQ-R400CB

CSE-512F-350B

CSE-512F-441B

CSE-811TQ-R441B

CSE-813MTQ-350C

CSE-813MTQ-441CB

CSE-813MTQ-R400CB

Expansion Slots:

PCI-Express

2 (x8) PCI-E 3.0 in x8 slots

1 (x4) PCI-E 2.0 in x8 slots

System BIOS

BIOS Type: 32Mb SPI Flash EEPROM with AMI BIOS

BIOS Features:

DMI (SMBIOS) 2.7

ACPI 4.0

PCI 2.3

USB Keyboard support

Management Software:

SuperDoctor® III

Watch Dog

NMI

Power Configurations:

ACPI / ACPM Power Management

Main Switch Override Mechanism

Power-on mode for AC power recovery

Internal/External modem ring-on

PC Health Monitoring

Voltage:

Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.

5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V

Fan:

Total of 5 fan headers supporting up to 5 fans

Five 4-pin fan headers

5x fans with tachometer status monitoring

Status monitor for speed control

Status monitor for on/off control

Support 3-pin fans (w/o speed control)

Low noise fan speed control

Pulse Width Modulated (PWM) fan connectors

Temperature:

Monitoring for CPU and chassis environment

CPU thermal trip support

FC temperature sensing logic

Thermal Monitor 2 (TM2) support

PECI

LED:

CPU / System Overheat LED

+5V Standby alert LED

Other Features:

Chassis intrusion detection

Chassis intrusion header