

Configuration |
|
---|---|
CPU | 2x Intel Xeon E5-2670 V3 2.2Ghz 12 Core (total 24 Cores) |
Memory | 64GB DDR4 ECC REG |
Hard Drives | 4x 960GB NVME hard drive |
Controllers | 3x AOC-S3008L-L8e HBA 12Gb/s (20x 2.5-inch SAS3/SATA3 HDD/SSD) |
OB NIC | Intel X540 Dual Port 10GBase-T (AOC-2UR8N4-I2XT) with 4 NVMe ports, 1 internal PCI-E x8 3.0 slot, and 1 PCI-E x8 3.0 (in x16 slot) |
Secondary Chassis/Motherboard Specs
Server Chassis/Case | SYS-2028U-TNRT+ |
Motherboard | X10DRU-i+ * Integrated IPMI 2.0 Management |
Backplane | BPN-SAS3-216EL1-N4BPN-SAS3-216A-N4 24-port 2U SAS3 12Gbps hybrid backplane, support up to 20x 2.5-inch SAS3/SATA3 HDD/SSD and 4x SAS3/SATA3/NVMe Storage Devices |
Motherboard PCI slots | Up to 7x PCI-E 3.0 x8 slots (up to 5x FH, 10.5" L, 1x LP, 1x Internal LP) |
Front Bays | 2U 24x 2.5" Drive Bays |
Caddies Included | 24x 2.5" Supermicro caddy |
Power | 2x 1000Watt Power Supply PWS-1K02A-1R Titanium |
Mounting | Supermicro Rev B Rail Kit 2U |
Warranty | 90 day Seller Warranty |
SKU: 508203-2U-X10DRU-i+-24BS-IP-4xNVMe-2x10BaseT-2P
JAA 05/09/2024
Feature | Technical specification |
---|---|
SYS-2028U-TNRT+ | SuperServer 2028U-TNRT+ (Black) |
Motherboard | Super X10DRU-i+ |
CPU | Intel® Xeon® processor E5-2600 v4/ v3 family (up to 160W TDP) * Dual Socket R3 (LGA 2011) |
Cores / Cache | Up to 22 Cores / Up to 55MB Cache |
System Bus | QPI up to 9.6 GT/s |
Note | BIOS version 2.0 or above is requiredBIOS version 2.0 or above is required |
Memory Capacity | 24x 288-pin DDR4 DIMM slots Up to 3TB† ECC 3DS LRDIMM, 768GB ECC RDIMM |
Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit 2666/2400 ECC DDR4 NVDIMM |
DIMM Sizes | 64GB, 32GB, 16GB, 8GB, 4GB NVDIMM: 16GB |
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors |
Chipset | Intel® C612 chipset |
SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
Network Connectivity | 2x 10GBase-T ports via AOC-2UR8N4-i2XT Intel® X540 10GBase-T 1x Realtek RTL8211E PHY (dedicated IPMI) |
Graphics | ASPEED AST2400 BMC |
SATA | 8x SATA3 (6Gbps) ports |
SAS | 24x SAS3 ports support via optional Add-on Cards |
NVMe | 4x NVMe ports |
LAN | 2x 10GBase-T LAN ports 1x RJ45 Dedicated IPMI LAN port |
USB | 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A) |
Video | 1x VGA Connector |
Serial Port / Header | 1x Serial header |
DOM | 2x SuperDOM (Disk on Module) ports |
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
Software | SuperDoctor® 5 Intel® Node Manager 3.0 Watch Dog NMI SUM and SSM Optional IPMI 1.5 / 2.0 |
Power Configurations | ACPI Power Management Power-on mode for AC power recovery |
Form Factor |
2U Rackmount |
Model | CSE-219UAC-R1K02 |
Width | 17.2" (437mm) |
Height | 3.5" (89mm) |
Depth |
27.76" (705.3mm) |
Weight | Net Weight: 36 lbs (16.4 kg) Gross Weight: 72 lbs (32.7 kg) |
Available Colors |
Black |
Buttons | Power On/Off button System Reset button |
LEDs | Power status LED HDD activity LED 2x Network activity LEDs System information (overheat/UID) LED |
PCI-Express |
7x PCI-E 3.0 x8 slots (5x FH, 10.5" L, 1x LP, 1x Internal LP) (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers) |
Hot-swap |
24x 2.5" Hot-swap drive bays Default 8x SATA3 ports and 4x NVMe ports Optional 24x SAS3 ports via AOC Note: optional storage card is required to support more than 10 drives. |
Fans | 4x 8cm heavy duty PWM fans |
Power Supply | 1000W Redundant Power Supplies with PMBus |
Total Output Power |
800W: 100 – 127Vac 1000W: 200 – 240Vac 1000W: 200 – 240Vdc (for CCC only) |
Dimension (W x H x L) |
73.5 x 40 x 203 mm |
Input |
100-127Vac / 9.8 - 7A / 50-60Hz 200-240Vac / 7 - 5A / 50-60Hz 200-240Vdc / 7 - 5A (for CCC only) |
+12V |
Max: 66.7A / Min: 0A (100-127Vac) Max: 83A / Min: 0A (200-240Vac) Max: 83A / Min: 0A (200-240Vdc) |
12Vsb |
Max: 2.1A / Min: 0A |
Output Type |
25 Pairs Gold Finger Connector |
Certification | 80 Plus Titanium Level |
Voltage |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator |
FAN |
8x 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
Temperature | Support to monitor Supermicro AOC temperatures from IPMI or SD 5 Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI |
LED | Memory DIMM ECC error LEDs CPU / System Overheat LED Suspend static indicator LED UID/Remote UID |
Other Features | 4x 8-pin GPU power connectors Chassis intrusion detection Chassis intrusion header SDDC Support RoHS |
RoHS | RoHS Compliant |
Environmental Spec. |
Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
You will be responsible for paying for your own shipping costs for returning any items. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping
will be deducted from your refund if we've provided a return label for you.
Reminder: All returns must be made with a shipping service that provides tracking for your package.
Our warranty covers
DOA (Dead on Arrival) of Hardware
Missing Parts
Items Damaged in shipping