

The SuperServer 2026TT-DLRF/DLIBXRF/DLIBQRF is a top-of-the-line "2U Twin" server that consists of the SC217HD-R1400BP 2U chassis and two serverboards. The serverboards included in each model are either X8DTT-HEF+, X8DTTHIBXF+, or X8DTT-HIBQF+ serverboards.
Configuration |
|
---|---|
CPU | 2x Intel Xeon E5645 Hex (6) Core 2.4GHz (Total 4 CPu's) |
Memory | 64GB DDR3 ECC REG ( Total 128GB ) |
Hard Drives | None |
Controllers | 64GB DDR3 ECC REG ( Total 128GB ) |
OB NIC | Integrated Dual Intel 1000BASE-T Ports |
Secondary Chassis/Motherboard Specs
Server Chassis/Case | SYS-2026TT-DLRF |
Motherboard | X8DTT-HEF+ * Integrated IPMI 2.0 Management |
Backplane | BPN-SAS-217HD 24pcs 2.5" HDD for two node CSE-217HD |
Motherboard PCI slots | Per Node: 2 (x8) PCI-E 2.0 (in x16, low-profile) |
Front Bays | 2U 24x 2.5" Drive Bays 2 Nodes |
Rear Bay | None |
Caddies Included | 24x 2.5" Supermicro caddy |
Power | 2x 1400Watt Power Supply |
Mounting | Generic Sliding Rail kit |
Warranty | 90 day Seller Warranty |
SKU: 508101-2U-X8DTT-HEF+-2N-24BS-S2-2PS
JAA 05/10/2024
Feature | Technical specification |
---|---|
Processors | Four Intel® 5600/5500 Series processors in LGA1366 sockets |
Chipset | Intel 5520/ICH10R |
BIOS |
32 Mb AMI SPI Flash ROM (each serverboard)
|
Memory Capacity (each Serverboard) | Twelve DIMM sockets that can support up to 192 GB of registered ECC or 48 GB of unbuffered ECC/Non-ECC DDR3-1333/1066/800 SDRAM Note: Refer to Section 5-6 for details |
SAS Controller | LSI 2108 controller on daughter card for 6 Gb/s SAS drives (IT mode) |
SATA Controller | SAS controller on daughter card to support six 3 Gb/s Serial ATA (IT mode) |
SAS/SATA Drive Bays
|
Twenty four hot-swap drive bays to house 2.5" hard drives (twelve per node) |
PCI Expansion | Four PCI Express x8 add-on cards (with pre-installed RSC-R2UT-2E8R riser cards) |
Serverboard | 2026TT-DLRF: X8DTT-HEF+ 2026TT-DLIBXRF: X8DTT-HIBXF+ 2026TT-DLIBQRF: X8DTT-HIBQF+ Dimensions (all): 16.64" (L) x 6.80" (W) (422.66 mm x 172.72 mm) |
Chassis | SC217HD-R1400BP (2U Rackmount) Dimensions: (WxHxD) 17.2 x 3.5 x 28.5 in. (437 x 89 x 724 mm) |
Weight | Gross Weight: 85 lbs. (38.6 kg.) |
System Cooling |
Four 8-cm PWM (Pulse Width Modulated) fans |
System Input Requirements |
AC Input Voltage: 100 - 240V AC auto-range |
Power Supply | Rated Output Power: 1400W (Part# PWS-1K41P-1R) 80 Plus Gold Certifi ed Rated Output Voltages: +12V (91A @ 110V, 116A @ 180~240V), +5Vsb (4A @ 240V, 4A @ 100V) |
Operating Environment | Operating Temperature: 10º to 35º C (50º to 95º F) Non-operating Temperature: -40º to 70º C (-40º to 158º F) Operating Relative Humidity: 20% to 95% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |
Regulatory Compliance | Electromagnetic Emissions: FCC Class A, EN 55022 Class A, EN 61000-3-2/- 3-3, CISPR 22 Class A Electromagnetic Immunity: EN 55024/CISPR 24, (EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11) Safety: CSA/EN/IEC/UL 60950-1 Compliant, UL or CSA Listed (USA and Canada), CE Marking (Europe) California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate” |
You will be responsible for paying for your own shipping costs for returning any items. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping
will be deducted from your refund if we've provided a return label for you.
Reminder: All returns must be made with a shipping service that provides tracking for your package.
Our warranty covers
DOA (Dead on Arrival) of Hardware
Missing Parts
Items Damaged in shipping