Skip to main content
Toggle menu

Dell PowerEdge R630
0
Zoom the image with the mouse

GIGABYTE

NEW 6x 1.92TB NVMe 2U R281-Z91 Server 2x AMD EPYC 7551 64 cores 256GB DDR4 2PS

No reviews yet
Shipping: $65.00 (Fixed Shipping Cost)
Condition: New
Brand: GIGABYTE
Model: R281-Z91
Type: Server
$1,774.00 - $2,413.00
New in BOX 2U Gigabyte R281-Z91 24 bays 6x NVME 18x SFF SAS dual Power supply
New server chassis, Components are used in house tested

PRODUCT DESCRIPTION

The server boasts of Dual AMD EPYC™ 7001 series processors, 8-Channel RDIMM/LRDIMM DDR4, and 32 DIMMs. It features 2 x 1Gb/s BASE-T LAN ports (Intel® I350-AM2), 1 dedicated management port, and 7 PCIe Gen3 expansion slots. Additionally, it has 6 x 2.5" U.2 bays, 20 x 2.5" SATA/SAS hot-swappable HDD/SSD bays, ultra-fast M.2 with PCIe Gen3 x4 interface, and Aspeed® AST2500 remote management controller. The server is powered by an unyielding 1200W 80 PLUS Platinum redundant PSU.

CONFIGURATION

CPU :2x AMD EPYC 7551 32 Cores 2.0Ghz (total 64 cores) (Zen Naples)
Memory :256Gb DDR4 ECC REG
Hard Drives :6x 1.92TB NVME Drives, REF MZ-QLB1T90 SAMSUNG 2.5in 1.92TB NVME PCIe SSD GEN3 PM983
Controllers :1x LSI 9361-8i raid card with BBU wire to the remaining 18 slots

Secondary Chassis/Motherboard Specs

Server Chassis/Case :R281-Z91
Motherboard :MZ91-FS0
Management :1 x Dedicated management port
Caddies Included :6x 2.5" NVME Drive Caddies, 18x 2.5" SATA Drive
PCI-Expansions slots :5 x PCIe Gen3 expansion slots
Power Supply :2x 1200W Power Supplies
Mounting :Rail Kit
Warranty :60 Day Seller Warranty

OFFICIAL GIGABYTE R281-Z91 SPECIFICATIONS

Physical Stats Technical specification
Dimensions (WxHxD, mm) 2U
438 x 87 x 710
Motherboard

MZ91-FS0
CPU

AMD EPYC™ 7001 series processor family
Dual processors, 14nm, Socket SP3
Up to 32-core, 64 threads per processor
TDP up to 200W

NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable
Chipset

System on Chip
Memory

32 x DIMM slots
DDR4 memory supported only
8-Channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Memory speed: 2666(1DPC)/2400/2133* MHz

Note:
Memory speed run at 2133MHz when 1R/2R memory modules are fully populated
LAN 2 x 1GbE LAN ports (1 x Intel® I350-AM2)
1 x 10/100/1000 management LAN
Video Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp
Audio N/A
Storage

Front side: 6 x 2.5" U.2, 18 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays

LSI SAS35x36 expander
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port

Default configuration supports:
6 x U.2, 0 x SAS/SATA drives

SAS card is required to enable the drives
RAID For SAS/SATA supported only
Depends on RAID card
Peripheral Drives N/A
Expansion Slots

Riser Card CRS2133:
- 1 x PCIe x16 slot (Gen3 x16 or x8), Full height half-length
- 1 x PCIe x8 slot (Gen3 x0 or x8), Full height half-length
- 1 x PCIe x8 slot (Gen3 x8), Full height half-length

Riser Card CRS2134:
- 1 x PCIe x16 slot (Gen3 x16 or x8), Full height half-length
- 1 x PCIe x8 slot (Gen3 x0 or x8), Full height half-length
- 1 x PCIe x8 slot (Gen3 x8), Full height half-length, Occupied by CNV3122, 2 x U.2 ports

Riser Card CRS2124:
- 1 x PCIe x8 slot (Gen3 x0 or x8), Low profile half-length
- 1 x PCIe x16 slot (Gen3 x16 or x8), Low profile half-length
2 x OCP mezzanine slots

- PCIe Gen3 x16
- Type1, P1, P2, P3, P4, K2, K3

1 x M.2 slot:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280 cards
Internal I/O 6 x SlimSAS connectors
1 x M.2 slot
2 x CPU fan headers
1 x USB 3.0 header
1 x TPM header
7 x PCIe expansion slots
2 x OCP mezzanine slots
2 x Power supply connectors
1 x Front panel header
1 x Back plane board header
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
Front I/O 2 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x NMI button
1 x System status LED
1 x HDD activity LED
2 x LAN activity LEDs
Rear I/O 2 x USB 3.0
1 x VGA
1 x COM (RJ45 type)
2 x RJ45
1 x MLAN
1 x ID button with LED
Backplane Board Front side_CBP20O5: 18 x SATA/SAS and 6 x NVMe ports
Rear side_CBP2020: 2 x SATA/SAS ports (connected to SAS expander)
Front side_CEP26O0: 18 x SATA/SAS expander
TPM 1 x TPM header with LPC interface
Optional TPM2.0 kit: CTM000
Power Supply

2 x 1200W redundant PSUs
80 PLUS Platinum

AC Input:
- 100-240V~/ 12-7A, 50-60Hz

DC Input:
- 240Vdc/ 6A

DC Output:
- Max 1000W/ 100-240V~
+ 12V/ 80.5A
+ 12Vsb/ 3A
- Max 1200W/ 200-240V~ or 240Vdc Input
+ 12V/ 97A
+ 12Vsb/ 3A
System Management

Aspeed® AST2500 management controller
Avocent® MergePoint IPMI 2.0 web interface:

Network settings
Network security settings
Hardware information
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Fan profiles
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM & vMedia (HTML5)
OS Compatibility

Windows Server 2012 R2 with Update
Windows Server 2016

Red Hat Enterprise Linux 7.4 (x64) or later
Red Hat Enterprise Linux 8.0 (x64) or later
Red Hat Enterprise Linux 9.0 (x64) or later

SUSE Linux Enterprise Server 11 SP4 (x64) or later
SUSE Linux Enterprise Server 12 SP3 (x64) or later
SUSE Linux Enterprise Server 15 (x64) or later

Ubuntu 16.04 LTS (x64) or later
Ubuntu 18.04 LTS (x64) or later
Ubuntu 20.04 LTS (x64) or later

VMware ESXi 6.5 Update1 or later
VMware ESXi 6.7 or later
VMware ESXi 7.0 or later
VMware ESXi 8.0 or later

Citrix Xenserver 7.1.0 CU2 or later
Citrix Xenserver 7.4.0 or later
Citrix Hypervisor 8.0.0 or later
System Fans 4 x 80x80x38mm (16,300rpm)
Operating Properties Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)
Weight 22 kg
More details
Choose Options:
Hurry! Only left
Share:

NEW 6x 1.92TB NVMe 2U R281-Z91 Server 2x AMD EPYC 7551 64 cores 256GB DDR4 2PS

$1,774.00 - $2,413.00
Choose Options

NEW 6x 1.92TB NVMe 2U R281-Z91 Server 2x AMD EPYC 7551 64 cores 256GB DDR4 2PS

$1,774.00 - $2,413.00

Write a Review

image of R281-Z91 server front view

GIGABYTE

NEW 6x 1.92TB NVMe 2U R281-Z91 Server 2x AMD EPYC 7551 64 cores 256GB DDR4 2PS

 
New in BOX 2U Gigabyte R281-Z91 24 bays 6x NVME 18x SFF SAS dual Power supply
New server chassis, Components are used in house tested

PRODUCT DESCRIPTION

The server boasts of Dual AMD EPYC™ 7001 series processors, 8-Channel RDIMM/LRDIMM DDR4, and 32 DIMMs. It features 2 x 1Gb/s BASE-T LAN ports (Intel® I350-AM2), 1 dedicated management port, and 7 PCIe Gen3 expansion slots. Additionally, it has 6 x 2.5" U.2 bays, 20 x 2.5" SATA/SAS hot-swappable HDD/SSD bays, ultra-fast M.2 with PCIe Gen3 x4 interface, and Aspeed® AST2500 remote management controller. The server is powered by an unyielding 1200W 80 PLUS Platinum redundant PSU.

CONFIGURATION

CPU :2x AMD EPYC 7551 32 Cores 2.0Ghz (total 64 cores) (Zen Naples)
Memory :256Gb DDR4 ECC REG
Hard Drives :6x 1.92TB NVME Drives, REF MZ-QLB1T90 SAMSUNG 2.5in 1.92TB NVME PCIe SSD GEN3 PM983
Controllers :1x LSI 9361-8i raid card with BBU wire to the remaining 18 slots

Secondary Chassis/Motherboard Specs

Server Chassis/Case :R281-Z91
Motherboard :MZ91-FS0
Management :1 x Dedicated management port
Caddies Included :6x 2.5" NVME Drive Caddies, 18x 2.5" SATA Drive
PCI-Expansions slots :5 x PCIe Gen3 expansion slots
Power Supply :2x 1200W Power Supplies
Mounting :Rail Kit
Warranty :60 Day Seller Warranty

OFFICIAL GIGABYTE R281-Z91 SPECIFICATIONS

Physical Stats Technical specification
Dimensions (WxHxD, mm) 2U
438 x 87 x 710
Motherboard

MZ91-FS0
CPU

AMD EPYC™ 7001 series processor family
Dual processors, 14nm, Socket SP3
Up to 32-core, 64 threads per processor
TDP up to 200W

NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable
Chipset

System on Chip
Memory

32 x DIMM slots
DDR4 memory supported only
8-Channel memory architecture
RDIMM modules up to 64GB supported
LRDIMM modules up to 128GB supported
Memory speed: 2666(1DPC)/2400/2133* MHz

Note:
Memory speed run at 2133MHz when 1R/2R memory modules are fully populated
LAN 2 x 1GbE LAN ports (1 x Intel® I350-AM2)
1 x 10/100/1000 management LAN
Video Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp
Audio N/A
Storage

Front side: 6 x 2.5" U.2, 18 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays

LSI SAS35x36 expander
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port

Default configuration supports:
6 x U.2, 0 x SAS/SATA drives

SAS card is required to enable the drives
RAID For SAS/SATA supported only
Depends on RAID card
Peripheral Drives N/A
Expansion Slots

Riser Card CRS2133:
- 1 x PCIe x16 slot (Gen3 x16 or x8), Full height half-length
- 1 x PCIe x8 slot (Gen3 x0 or x8), Full height half-length
- 1 x PCIe x8 slot (Gen3 x8), Full height half-length

Riser Card CRS2134:
- 1 x PCIe x16 slot (Gen3 x16 or x8), Full height half-length
- 1 x PCIe x8 slot (Gen3 x0 or x8), Full height half-length
- 1 x PCIe x8 slot (Gen3 x8), Full height half-length, Occupied by CNV3122, 2 x U.2 ports

Riser Card CRS2124:
- 1 x PCIe x8 slot (Gen3 x0 or x8), Low profile half-length
- 1 x PCIe x16 slot (Gen3 x16 or x8), Low profile half-length
2 x OCP mezzanine slots

- PCIe Gen3 x16
- Type1, P1, P2, P3, P4, K2, K3

1 x M.2 slot:
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280 cards
Internal I/O 6 x SlimSAS connectors
1 x M.2 slot
2 x CPU fan headers
1 x USB 3.0 header
1 x TPM header
7 x PCIe expansion slots
2 x OCP mezzanine slots
2 x Power supply connectors
1 x Front panel header
1 x Back plane board header
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
Front I/O 2 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x NMI button
1 x System status LED
1 x HDD activity LED
2 x LAN activity LEDs
Rear I/O 2 x USB 3.0
1 x VGA
1 x COM (RJ45 type)
2 x RJ45
1 x MLAN
1 x ID button with LED
Backplane Board Front side_CBP20O5: 18 x SATA/SAS and 6 x NVMe ports
Rear side_CBP2020: 2 x SATA/SAS ports (connected to SAS expander)
Front side_CEP26O0: 18 x SATA/SAS expander
TPM 1 x TPM header with LPC interface
Optional TPM2.0 kit: CTM000
Power Supply

2 x 1200W redundant PSUs
80 PLUS Platinum

AC Input:
- 100-240V~/ 12-7A, 50-60Hz

DC Input:
- 240Vdc/ 6A

DC Output:
- Max 1000W/ 100-240V~
+ 12V/ 80.5A
+ 12Vsb/ 3A
- Max 1200W/ 200-240V~ or 240Vdc Input
+ 12V/ 97A
+ 12Vsb/ 3A
System Management

Aspeed® AST2500 management controller
Avocent® MergePoint IPMI 2.0 web interface:

Network settings
Network security settings
Hardware information
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Fan profiles
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM & vMedia (HTML5)
OS Compatibility

Windows Server 2012 R2 with Update
Windows Server 2016

Red Hat Enterprise Linux 7.4 (x64) or later
Red Hat Enterprise Linux 8.0 (x64) or later
Red Hat Enterprise Linux 9.0 (x64) or later

SUSE Linux Enterprise Server 11 SP4 (x64) or later
SUSE Linux Enterprise Server 12 SP3 (x64) or later
SUSE Linux Enterprise Server 15 (x64) or later

Ubuntu 16.04 LTS (x64) or later
Ubuntu 18.04 LTS (x64) or later
Ubuntu 20.04 LTS (x64) or later

VMware ESXi 6.5 Update1 or later
VMware ESXi 6.7 or later
VMware ESXi 7.0 or later
VMware ESXi 8.0 or later

Citrix Xenserver 7.1.0 CU2 or later
Citrix Xenserver 7.4.0 or later
Citrix Hypervisor 8.0.0 or later
System Fans 4 x 80x80x38mm (16,300rpm)
Operating Properties Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)
Weight 22 kg
 
60 Day Seller Warranty! Unless Stated Otherwise in Listing. For Extended Warranty Please Call: 877-UNIX-123
 

Customer Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write a Review