Supermicro
Storage Server Starter Kit - 2U RAID 12 Bay 18TB HD Compatible Dual Xeon Rail
PRODUCT DESCRIPTION
The Super X9DR3-LN4F+/X9DRi-LN4F+ motherboard is the ultimate solution for high-end server platforms. This motherboard supports dual Intel E5-2600(v2) Series Processors (Socket R LGA 2011) that offer QPI (Intel QuickPath Interface) Technology (V.1.1) with a transfer speed of up to 8.0 TG/s. The C606/C602 chipset built in the X9DR3/i-LN4F+ motherboard provides support for Intel® Management Engine (ME), Rapid Storage Technology, Digital Media Interface (DMI), PCI-E Gen. 3.0, and up to 1866 MHz DDR3 memory. These features greatly enhance system performance for HPC/Cluster/Database servers. If you are looking for the best performance and reliability, the Super X9DR3-LN4F+/X9DRi-LN4F+ motherboard is the perfect choice.
CONFIGURATION
CPU | :2x E5-2670V2 2.50GHz 10C |
Memory | :32GB DDR3 RAM KIT (Total RAM) |
Hard Drives | :(CHOOSE THE OPTIONS) |
Controllers | :AOC-SAS2LP-H8IR Low Profile RAID Controller connected to 8 Drive Bays - 4 Drive Bays connected to Controller on Motherboard |
OB NIC | :4x RJ45 1GBase-T |
Secondary Chassis/Motherboard Specs
Server Chassis/Case | :2U-X9DRI-LN4F+1.2-12BLIP |
Motherboard | :X9DRi-LN4F+ V1.20A |
Backplane | :iPath |
PCI slots | :6 Slot |
Frond Bays | :2U 12 Bay 3.5 Single Node |
Caddies Included | :12 Bay 3.5 |
Rear Bays | :0 Bay N/A |
PSU Slots | :Dual PSU Slots |
Power | :2x Power Supplies PWS-920P-1R Platium |
Mounting | :Generic Rail Kit |
Warranty | :60 day Seller Warranty |
OFFICIAL X9DRI-LN4F+ SPECIFICATIONS
Feature | Technical specification |
---|---|
CPU | Dual Intel® E5-2600(v2) Series Processors (Socket R LGA 2011); each processor supports four full-width Intel QuickPath Interconnect (QPI) links (with support of up to 25.6 GT/s per QPI link and with Data Transfer Rate of up to 8.0 GT/s per direction). Note: For E5-2600(v2) processor support, BIOS version 3.0 or above is required. |
Memory | Integrated memory controller supports up to 1.5 TB of Load Reduced (LRDIMM), 768 Gb of Registered (RDIMM) or 128 GB of Unbuffered (UDIMM) ECC/NonECC DDR3 800/1066/1333/1600/1866 MHz 240-pin 4-channel memory in 24 DIMM slots. Note 1: 1866 MHz memory support is dependent on Intel E5-2600v2 CPUs. |
Virtualization: VT-x, VT-d, and VT-c | |
Chipset | Intel® C606/C602 Chipset |
Expansion Slots | Four (4) PCI Express 3.0 x16 slots (CPU1 Slot1/Slot3, CPU2 Slot4/Slot5) • One (1) PCI Express 3.0 x8 slot (CPU2 Slot6) • One (1) PCI Express 3.0x4 in x8 slot (CPU1 Slot2) |
Graphics | Winbond Matrox MGA 200 Video Controller |
Network | One Intel i350A Gigabit (100/1000 Mb/s) Ethernet Quad/ Dual-Channel Controller for LAN1~LAN4 ports. |
Winbond WPCM450R Baseboard Controller (BMC) supports IPMI_LAN 2.0 | |
I/O Devices | |
SATA Connections | |
SATA Ports | Six (6): Two (2) SATA 3.0, Four (4) SATA 2.0 Ports Four (4) SATA 2.0 Ports from SCU (X9DRi-LN4F+) |
RAID | RAID 0, 1, 5, 10 (Windows) RAID 0, 1, 5, 10 (Linux) |
SCU Connections | |
SCU SAS/ SATA2 Port | 0~3, 4~7 (X9DR3-LN4F+ Only) |
RAID | RAID 0, 1, 10 (Windows/Linux |
Integrated IPMI 2.0 | IPMI 2.0 supported by the Winbond WPCM 450R BMC |
Serial (COM) Port | Two (2) Fast UART 16550 Connection: 9-pin RS232 port |
Keyboard/Mouse | Backplane USB Keyboard/Mouse |
VGA | Backplane VGA Port |
Peripheral Devices | |
USB Devices | Four (4) USB ports on the rear I/O panel (USB 0/1, USB 2/3), |
Four (4) USB connections for front access (USB 4/5, USB 6/7) | |
One (1) Type A USB connector for front access (USB 9) | |
BIOS | 16MB AMI Flash ROM |
APM 1.2, DMI 2.3, PCI 2.3, ACPI 1.0/2.0/3.0, USB Keyboard, Plug & Play (PnP) and SMBIOS 2.3 | |
Power Config. | ACPI/ACPM Power Management |
Main switch override mechanism | |
Keyboard Wake-up from Soft-Off | |
Power-on mode for AC power recovery | |
Intel® Intelligent Power Node Manager (NM) (Available when the NMView utility is installed in the system) Management Engine (ME) | |
PC Health Monitoring | |
CPU Monitoring | Onboard voltage monitors for 1.8V, +3.3V, 3.3VSB, +5V Standby, 1.35V, 1.5V, Chipset Voltage, and Battery Voltage |
CPU 6-Phase switching voltage regulator | |
CPU/System overheat LED and control | |
CPU Thermal Trip support | |
Thermal Monitor 2 (TM2) support | |
Fan Control | Fan status monitoring with firmware thermal management via IPMI 2.0 |
Low noise fan speed control | |
LED Indicators | System/CPU Overheat LED |
Suspend-state LED | |
UID/Remote UID LED | |
System Management | PECI (Platform Environment Configuration Interface) 2.0 support |
System resource alert via SuperDoctor® III | |
Thermal Monitor 2 (TM2) support | |
SuperDoctor® III, Watch Dog, NMI | |
Chassis Intrusion Header and Detection | |
Dimensions | 13.68" (L) x 13.05" (W) (347.47 mm x 331.47 mm) |
PRODUCT DESCRIPTION
The Super X9DR3-LN4F+/X9DRi-LN4F+ motherboard is the ultimate solution for high-end server platforms. This motherboard supports dual Intel E5-2600(v2) Series Processors (Socket R LGA 2011) that offer QPI (Intel QuickPath Interface) Technology (V.1.1) with a transfer speed of up to 8.0 TG/s. The C606/C602 chipset built in the X9DR3/i-LN4F+ motherboard provides support for Intel® Management Engine (ME), Rapid Storage Technology, Digital Media Interface (DMI), PCI-E Gen. 3.0, and up to 1866 MHz DDR3 memory. These features greatly enhance system performance for HPC/Cluster/Database servers. If you are looking for the best performance and reliability, the Super X9DR3-LN4F+/X9DRi-LN4F+ motherboard is the perfect choice.
CONFIGURATION
CPU | :2x E5-2670V2 2.50GHz 10C |
Memory | :32GB DDR3 RAM KIT (Total RAM) |
Hard Drives | :(CHOOSE THE OPTIONS) |
Controllers | :AOC-SAS2LP-H8IR Low Profile RAID Controller connected to 8 Drive Bays - 4 Drive Bays connected to Controller on Motherboard |
OB NIC | :4x RJ45 1GBase-T |
Secondary Chassis/Motherboard Specs
Server Chassis/Case | :2U-X9DRI-LN4F+1.2-12BLIP |
Motherboard | :X9DRi-LN4F+ V1.20A |
Backplane | :iPath |
PCI slots | :6 Slot |
Frond Bays | :2U 12 Bay 3.5 Single Node |
Caddies Included | :12 Bay 3.5 |
Rear Bays | :0 Bay N/A |
PSU Slots | :Dual PSU Slots |
Power | :2x Power Supplies PWS-920P-1R Platium |
Mounting | :Generic Rail Kit |
Warranty | :60 day Seller Warranty |
OFFICIAL X9DRI-LN4F+ SPECIFICATIONS
Feature | Technical specification |
---|---|
CPU | Dual Intel® E5-2600(v2) Series Processors (Socket R LGA 2011); each processor supports four full-width Intel QuickPath Interconnect (QPI) links (with support of up to 25.6 GT/s per QPI link and with Data Transfer Rate of up to 8.0 GT/s per direction). Note: For E5-2600(v2) processor support, BIOS version 3.0 or above is required. |
Memory | Integrated memory controller supports up to 1.5 TB of Load Reduced (LRDIMM), 768 Gb of Registered (RDIMM) or 128 GB of Unbuffered (UDIMM) ECC/NonECC DDR3 800/1066/1333/1600/1866 MHz 240-pin 4-channel memory in 24 DIMM slots. Note 1: 1866 MHz memory support is dependent on Intel E5-2600v2 CPUs. |
Virtualization: VT-x, VT-d, and VT-c | |
Chipset | Intel® C606/C602 Chipset |
Expansion Slots | Four (4) PCI Express 3.0 x16 slots (CPU1 Slot1/Slot3, CPU2 Slot4/Slot5) • One (1) PCI Express 3.0 x8 slot (CPU2 Slot6) • One (1) PCI Express 3.0x4 in x8 slot (CPU1 Slot2) |
Graphics | Winbond Matrox MGA 200 Video Controller |
Network | One Intel i350A Gigabit (100/1000 Mb/s) Ethernet Quad/ Dual-Channel Controller for LAN1~LAN4 ports. |
Winbond WPCM450R Baseboard Controller (BMC) supports IPMI_LAN 2.0 | |
I/O Devices | |
SATA Connections | |
SATA Ports | Six (6): Two (2) SATA 3.0, Four (4) SATA 2.0 Ports Four (4) SATA 2.0 Ports from SCU (X9DRi-LN4F+) |
RAID | RAID 0, 1, 5, 10 (Windows) RAID 0, 1, 5, 10 (Linux) |
SCU Connections | |
SCU SAS/ SATA2 Port | 0~3, 4~7 (X9DR3-LN4F+ Only) |
RAID | RAID 0, 1, 10 (Windows/Linux |
Integrated IPMI 2.0 | IPMI 2.0 supported by the Winbond WPCM 450R BMC |
Serial (COM) Port | Two (2) Fast UART 16550 Connection: 9-pin RS232 port |
Keyboard/Mouse | Backplane USB Keyboard/Mouse |
VGA | Backplane VGA Port |
Peripheral Devices | |
USB Devices | Four (4) USB ports on the rear I/O panel (USB 0/1, USB 2/3), |
Four (4) USB connections for front access (USB 4/5, USB 6/7) | |
One (1) Type A USB connector for front access (USB 9) | |
BIOS | 16MB AMI Flash ROM |
APM 1.2, DMI 2.3, PCI 2.3, ACPI 1.0/2.0/3.0, USB Keyboard, Plug & Play (PnP) and SMBIOS 2.3 | |
Power Config. | ACPI/ACPM Power Management |
Main switch override mechanism | |
Keyboard Wake-up from Soft-Off | |
Power-on mode for AC power recovery | |
Intel® Intelligent Power Node Manager (NM) (Available when the NMView utility is installed in the system) Management Engine (ME) | |
PC Health Monitoring | |
CPU Monitoring | Onboard voltage monitors for 1.8V, +3.3V, 3.3VSB, +5V Standby, 1.35V, 1.5V, Chipset Voltage, and Battery Voltage |
CPU 6-Phase switching voltage regulator | |
CPU/System overheat LED and control | |
CPU Thermal Trip support | |
Thermal Monitor 2 (TM2) support | |
Fan Control | Fan status monitoring with firmware thermal management via IPMI 2.0 |
Low noise fan speed control | |
LED Indicators | System/CPU Overheat LED |
Suspend-state LED | |
UID/Remote UID LED | |
System Management | PECI (Platform Environment Configuration Interface) 2.0 support |
System resource alert via SuperDoctor® III | |
Thermal Monitor 2 (TM2) support | |
SuperDoctor® III, Watch Dog, NMI | |
Chassis Intrusion Header and Detection | |
Dimensions | 13.68" (L) x 13.05" (W) (347.47 mm x 331.47 mm) |